Designed and developed by Barza Tanich.
© 2024. All rights reserved by LGC.
ZTE ZXA10 C620
- Home
- ONT / OLT / FTTR Solutions
- ZTE ZXA10 C620
Previous
Next
ZTE ZXA10 C620 Small-capacity PON OLT Platform
- Small-capacity optical access platform with compact design and state-of-the-art architecture
- Fully-distributed and programmable router architecture supporting 4K/8K/VR, FMC, SDN/NFV/virtualization
- Network Processor (NP) + CLOS switch fabric architecture for easy upgrade
- Support for 32 GPON/XG(S)-PON/Combo PON/Any-PON ports
- Switching capacity of backplane bus: 1.8 Tbit/s and system switching capacity: 480 Gbit/s
- High-end router architecture fully supports L2/L3 functions
- Fully-distributed, separated control & forwarding, load balancing
- SDN/NFV ready, oriented to network re-architecture
- Suits deployment in low-density remote coverage, suburb districts, outskirts, rural areas, commercial buildings, base stations, and resorts/country clubs
- Supports 5-in-1 Any-PON, flexible switching between PON technologies
- Compact design for easy installation, saving manpower and shortening TTM
Product Specifications
System Architecture
- Network Processor (NP) + CLOS switch fabric architecture
- Fully-distributed, separated control & forwarding planes
- SDN/NFV ready, oriented to network re-architecture
- High-end router architecture fully supports L2/L3 functions
Access Features
- Supports 32 GPON/XG(S)-PON/Combo PON/Any-PON ports
- Three generations of PON technologies and directions in one platform
- Support for full services and scenarios access such as 4K/8K/VR, FMC, big video, etc.
Hardware Features
- 2U-high with 19' chassis
- Switching capacity of backplane bus: 1.8 Tbit/s
- System switching capacity: 480 Gbit/s
- 240G main control switching capacity
- Supports deployment in low-density remote coverage, limited room space
- Suitable for suburb districts, outskirts, rural areas, commercial buildings, base stations, resorts/country clubs
Subscriber Card Density
- 16 ports per card for GPON, XG-PON, XGS-PON, XG-PON & GPON Combo, XGS-PON & GPON Combo, and Any-PON cards
- Undifferentiated access within 0 km to 30 km
PON Features
- Compliance with ITU G.984.x for GPON
- Compliance with ITU G.987.x and G.988 for XG-PON
- Compliance with ITU-T G.9807.1 and G.988 for XGS-PON
- Supports up to 1:128 optical split ratio for GPON and 1:256 for XG-PON
- Supports OLS, FEC, AES-128 encryption
- Type B/C optical link protection
L2/L3 Features
- Access control: MAC filtering, ACL
- L2 services and TPID configuration
- Various VLAN configurations including 1:1 VLAN, N:1 VLAN, flexible QinQ, and VLAN bridge
- Uplink protocols: STP/RSTP/MSTP, LACP
- Routing: unicast routing forwarding, static route, IP based load balance, ECMP, and dynamic routing (RIPv1/v2, OSPFv2, BGP4, IS-IS v2)
- Supports DHCPv4, DHCP relay/proxy/snooping, Option 82, and Option 60
- ARP: ARP protocol, ARP Proxy
- IPv6 features and ND
- Supports BFD for IPv4/IPv6 routing protocol
QoS Features
- Queue & scheduling mechanisms: SP, WRR/DWRR, SP+WRR
- DSCP labeling and relabeling
- Traffic statistics and H-QoS
- Stream classification, rate limiting, shaping, and priority setting
- Congestion Avoidance: tail drop, color-based RED, WRED
- Configuration of CIR/PIR/CBS/PBS/CM, TrTCM
Security Features
- Broadcast/multicast flooding rate limitation
- Downstream ARP filtering
- Forwarding panel protocol packet rate limit
- DHCP anti-spoofing and anti-DoS attacking
- ARP/IP anti-spoofing, IP Source Guard
- Basic ACL and IPv6 ACL
- MAC address anti-drifting
- Port isolation: Uplink port/User port
- CPU protocol packet rate limit and scheduling
OAM Features
- Management protocol and interface: CLI, Telnet/SSHv2, SNMP v1/v2/v3
- Performance statistics and diagnostics
- Remote firmware download and upgrade
- Environment detection, control, and alarm
- Ethernet OAM: 802.1ag
- System fault auto-recovery and performance detection
Multicast
- IGMP snooping, proxy, router (v1/v2/v3)
- MLD v1/v2
- MVLAN: 4K Multicast VLAN
- Multicast snooping/proxy, router modes
- ASM/SSM mode based on IGMPv3 and MLDv2
- Less than 20 ms channel zapping delay
- PIM-SM, PIM-SSM
Environment
- Operating temperature: -40 °C ~ 65 °C
- Starting up temperature: ≥ -25°C
- Operating humidity: 5% ~ 95%, non-condensing
- Altitude: ≤ 4000 m
Power Supply
- Working voltage: -48 V (±20%), or -60 V (±20%)
Dimensions
- 2U-high with 19' chassis